Well this has been a long time coming. When we remodeled our master bedroom for the One Room Challenge, I was bound and determined I was going to include a faux farmhouse style fireplace and mantel. Now, if we had all the money in the world, we would have build a real deal fireplace with real brick, a real wood burning stove, and all the farmhouse goodness we could muster.
Alas, we are not made of money, actually, our money tree, that seemed to be doing okay the last few years, shriveled up and died! So, since all those elaborate steps were out of the question, I needed to come up with some other idea for how to create this cozy space in our bedroom. Not only did I want it to look cozy, I wanted it to be functional, with a freestanding fireplace that actually let off heat. You see we have very frigid winters, and I am a hater of forced heat. I cannot stand having the furnace on.
We currently try to heat our home with a wood burning stove on our first level, and a pellet stove on our second level. It had worked out pretty great, especially since we like our bedrooms on the chilly side. But, sometimes its just a bit too chilly, and it seems ridiculous to turn on the furnace just to take the edge off. You see, our room seems to stay the coldest, so having something that could produce some heat, while not kicking on the entire furnace seemed to make sense.
Now lets be real for a minute, I also wanted a fireplace in my room, because well, I wanted one. I have never been one to give up on something I want. I will find a way, no matter how difficult or how many times my husband cusses my name.
This may or may not have been one of those instances.
And you should be thanking me! This is something that anyone……ANYONE can do in their bedroom, family room, heck you could even do it in your dining room. Umm excuse me while I go jot that note down for future reference. Fireplace in the dining room. I can hear my husband cussing me already:)
Inspiration for my faux farmhouse style fireplace and mantel
Now, lets get down to business. This DIY faux farmhouse style fireplace and mantel was actually really easy to put together…well, it would have been even more easy if I could have picked a mantel up off Amazon, but I like to be difficult. Well, I call it being original.
When I began thinking about what I wanted this farmhouse fireplace to look like, I remembered a few pics I had taken on a recent trip. I am inspired by the old primitive farmhouse style fireplaces. You know the kind, the ones with a large mantel, and an even larger fireplace. The ones you could practically walk inside. Since there was no chance of doing anything like that I used them as my inspiration.
Here are a few pictures from trip we recently went on. These were taken in some very very old historic homes and my eyes were all heart eyes.
The incredible attention to detail, and the simple design is what I love so much about them. I also love imagining those families down through history using this fireplace to cook their meals, and heat their homes.
For my faux farmhouse fireplace and mantel, I wanted to create a look where the mantel was substantial and the freestanding electric stove sat inside the fireplace. I did not want it to stick out. So we made sure to create a deep fireplace and mantel, one that would accomplish this. If you don’t want this, you could easily build or purchase a pre-made mantel for a different look.
How to build a faux farmhouse style fireplace and mantel
To start building a farmhouse style fireplace and mantel, you first must assess the space that you want to use to install it. I chose a blank wall in my bedroom. You want to look for a space that is central to the room, where it can become the focal point, because you certainly want it to be seen and to stand out. Mine is visible from my bedroom door and commands the space. That is what I wanted.
Decide how big you want your faux fireplace and mantel
We had plenty of space for our fireplace, so take that into consideration when you are deciding to build something like this. We also needed to take into consideration the size of our freestanding stove. So we wanted it to be to scale. Not too large, and not too small.
You also want to consider a power source. Our freestanding stove needed to be plugged in, so we made sure that the space we were installing had an outlet. If the space you want to install one does not have power, you can easily have an outlet moved or installed.
Now its time to talk about what we used for this project:
This post contains affiliate links for your convenience
Here is a list of supplies and tools we used to build our farmhouse style fireplace and mantel:
- 1 by 12 inch planks of wood- we used 3 10 ft lengths
- compound miter saw
- table saw
- 1 by 1 inch square trim
- optional decorative trim
- shiplap for the inside of the fireplace
- brad nailer
- air compressor
- DIY weathered wood stain
- freestanding fireplace
We had to decide the height, width, and length of the fireplace.
Our farmhouse style fireplace and mantel dimensions:
The height of the fireplace came out to 54 inches with all the trim, etc.
The width came to 50 inches long
The depth was 11 inches deep
So this is how we broke it down.
Our farmhouse fireplace and mantel was build into three pieces: the top, and the two sides.
First we build the two sides:
We started by cutting 4 pieces 11 inches deep and 42 inches long, with one of the long sides mitered at a 45 degree angle.
We then cut 2 pieces 8 inches deep, and 42 inches long with both long sides mitered at 45 degrees.
Now, you will take two of the 11 inch deep pieces and one of the 8 inch pieces and you will make a U shape with them.
Now do the same with the other remaining 3 pieces. These are the starts to the vertical pieces of the fireplace.
Once they were put together we used a small piece of a 2 by 4 stud, and nailed that into the inside of the vertical pieces at the very top.(this is what you will use to secure the top to the bottom.)
We sat these up against the wall, and measured how far apart we wanted them. The full length being 50 inches.
Now build the top
We then cut one piece at 10 inches deep, and 50 inches long with the short ends mitered at a 45 degree angle.
Then, we cut two pieces at 10 inches deep and 11 inches long. We mitered one end on both pieces where it measured 10 inches long.
Next we nailed the mitered pieces together. This will become the front and sides of the fireplace top/mantel.
After that, we cut 2 pieces 1 inch smaller on all sides, so that it could fit snuggly into the top and bottom of the top/mantel/
We nailed these from the front.
So as you can see we are essentially building a fireplace “shell”. Since we didn’t need it to be solid, since it was more decorative that structural.
Connect the pieces of the faux fireplace and mantel
We sat the top piece onto the two vertical pieces and screwed down through the inside of the top piece into the vertical pieces below.
Now that the main shape is built we added a 1 1/2 inch thick by 12 inch deep by 52 inches long. This will be the mantel. It will give an inch overlap on the front and the sides.
We also added an angled piece under the mantel to give it a more substantial look.
We also added our 1 by 1 inch piece of trim to the spot where the top connects with the vertical pieces.
Now its starting to take shape!
The last few things we did was add trim and shiplap.
Secure the farmhouse style fireplace and mantel against the wall
We installed a few small blocks of 2 by 4 to the wall, where we wanted to secure the fireplace. We then placed the fireplace over the blocks and nailed into them. This will keep the fireplace securely connected to the wall.
Now its time for shiplap. We ran trim along the inside edges on both sides of the fireplace. We left a 1/4 inch overlap so that the shiplap would fit snug inside it.
Next we decided to install the trim at an angle on the top, so that it came to a point. It broke up all the square lines.
Last thing we did was install the shiplap, which we cut at 5 inches wide. We used 1/4 inch plywood for the shiplap, hence the 1/4 inch overlap with the trim that I stated earlier.
I painted the shiplap white, so that the freestanding fireplace would stand out.
Other options for this space could be:
Faux rock or
I went through all these options before landing on shiplap.
I finished off the mantel by staining it with my DIY weathered wood stain.
We also added shiplap above the fireplace that goes all the way up to the ceiling. This right here is my brag moment. I installed it all! I am horrible at cutting angles, and I never seem to get them right, but this right here, I accomplished without making any mistakes!
Creating and installing a faux fireplace and mantel for your home is a great way to add character, warmth(literally and figuratively) and it can give your space a great focal point, which is a really important element in any design.
The freestanding stove was inexpensive, and adds another source of heat in our home. I can’t wait until the fall weather starts creeping up and we can kick this baby on.
I have always wanted a fireplace in my room, and for a small cost, we were able to accomplish this.
This is a great thing to add to your bedroom, a family room, or even a dining room.
This is one of my favorite features in my master bedroom.
Right now it the perfect time to think about doing this since fall and winter are heading our way. What a better way to be ready that to have a cozy space to curl up, read a good book or watch a movie. Did I mention that my freestanding electric fireplace heats up to 1000 square feet? Well, how awesome is that. I think it will be a great addition to our second floor, which always stays a bit chilly.
Whats your favorite element of my faux fireplace and mantel? I have rounded up some of mine, and if you are looking to shop for some of them, they are all provided with links. Simply click on the image to be taken directly to it.
If you like this post, I would love it if you PIN IT for later!
Make sure you check out these other projects from my master bedroom remodel:
Love farmhouse style?
Join a community of over 10,000 and get simple design tips, tricks, and with my weekly newsletter. You will also gain exclusive access to my Printable Library!!